Submit a defect notification regarding leaking water fixtures
If a toilet or tap is dripping, this can quickly use up hundreds of litres of water. Report even small leaks as soon as you notice them.

Leaking taps and toilets consume a surprising amount of water.
- A running toilet that leaks half a litre per minute wastes over 5,000 litres in a week. A leak like this costs 23 euros a week if the water is cold. The volume of the leak equals the weekly water consumption of six people.
- A dripping faucet with a leak rate of 50 ml per minute leaks 500 litres in a week. The cost of this can be nearly 10 euros a month. A leaky tap can also consume hot water, which is more expensive.
Report leaking water fixtures as soon as you notice the leak. You can submit a defect notification via OmaHeka or with the online form.
Heka keeps a close eye on water consumption
Heka continuously monitors water consumption at its properties via the main water meter. If any leaks are found this way, we will attempt to repair them quickly.
However, the main water meter does not always reveal where the leak is, and smaller leaks may not necessarily show up in water consumption monitoring. This is why it is important for the residents to keep an eye on their water fixtures and report any leaks to Heka.
Saving water saves costs
Water is an important natural resource that should not be wasted. Water is also a significant cost for Heka. With smarter water use, you can reduce your day-to-day environmental impact and save on your living costs. By saving hot water, you also save energy.
Here are some tips to help you save water at home:
Keep your showers short
A 10-minute shower uses around 120 litres – or 12 buckets – of water, of which five buckets are hot water and the rest is cold water. Hot water is about twice as expensive as cold water, as the cost of the energy used to heat the water is added to the price.
With just a few simple steps, you can significantly reduce your water consumption:
- Shorten your shower time and do not linger.
- Instruct your children on shower times, too.
- Do not run the tap at full flow.
- Turn off the tap while lathering and use water only for rinsing.
Do not run water unnecessarily
- Do not leave the tap running when you are not using the water, for example when brushing your teeth.
- If you brush your teeth with the tap running for two minutes, you’ll use 12 litres of water – more than a bucketful.
Wash full loads
Washing clothes uses cold water because the machine heats the water it needs, using electricity. However, you can save water by doing laundry wisely:
- Wash full loads.
- Air your clothes out to extend the washing intervals.
- Choose a shorter, cooler cycle for clothes that are not very dirty.
Dishwashers use 2–5 times less water than hand washing
- If you have a dishwasher, avoid washing up by hand.
- If you wash dishes by hand, wash them in the sink, not under running water.
- Avoid unnecessary rinsing of dishes before putting them in the machine.